Use the RS5000 Corded Imager to capture barcode data.
RS5000 Corded Imager
To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the scanner to decode barcode data and display the barcode content.
Imager decoding usually occurs instantaneously. The RS5000 repeats the steps required to take a digital picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
To scan with the RS5000:
Connect the RS5000 to the device.
Press the scan trigger and aim the RS5000 at a bar code.
Ensure the bar code is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
RS5000 Aiming Pattern
RS5000 Pick List Mode with Multiple Bar Codes
If the decode is successful the LED lights green. The terminal beeps if programmed accordingly.
