RFID Calibration Process
RFID Calibration Process

RFID Calibration Process

Before calibrating, load RFID media into the printer and perform the label length calibration.
  1. Press
    FEED
    once to advance one label.
  2. Select Home using
    LEFT SELECT
    . Navigate to the RFID menu and press
    OK
    .
  3. Use
    LEFT ARROW
     and
    RIGHT ARROW
      to select the RFID CALIBRATE procedure, and then press
    OK
    .
    The printer slowly feeds a label while adjusting the location and RFID read/write communication settings for your chosen RFID tag/label. In some cases, the printer feeds an additional label when calibration has been completed successfully with the display message reading: READY.
  4. Remove the excess media.
Media calibration finishes and you are ready to print.