Sleep Mode

ZQ610 Plus/ZQ620 Plus/ZQ630 Plus User Guide
Introduction
Getting Started
Configuring the Printer
- Changing Printer Settings - User Menus
- RFID Calibration
  - RFID Calibration Process
Using the Printer
- Creating Labels
Maintaining the Printer
- Recommended Cleaning Schedule
  - Cleaning the Linerless Printer (ZQ610 Plus/ZQ620 Plus)
  - Cleaning the Linerless Printer (ZQ630 Plus)
Troubleshooting
Specifications

Sleep Mode

The Sleep mode feature preserves battery life by automatically entering a sleep state after 20 minutes of inactivity. In this state, content is not displayed on the LCD and the backlight is off. Other power management features of the ZQ600 Plus Series printers include Wake on Bluetooth and Wake on WiFi (the printer exits Sleep mode due to data exchanged via Bluetooth or a network message received over WiFi). The printer does not enter Sleep mode when docked in an Ethernet cradle.

To enable or disable Sleep mode:

Send the power.sleep.enable command to the printer using Printer Setup Utilities (PSU).

Set it to On (default) or Off.

To set the time after which the printer enters Sleep mode:

Send the power.sleep.timeout (in seconds) to the printer using PSU.