Accessories

Charges up to two standard or extended capacity batteries. Requires power supply (PWR-BGA12V50W0WW), DC line cord (CBL-DC-388A1-01), and country-specific AC line cord.

Provides tablet charging, USB communication, and Ethernet communication. Includes set of 10-32 nuts (4), screws (4), washers (4), and cable ties. Mount not included. Supports VESA 100 x 100, 100 x 50, and 75 x 75.

Provides tablet charging, USB communication, Ethernet communication, and antenna pass through. Requires power supply (PWR-BGA15V45W-UC-WW) with country-specific AC line cord. Includes set of 10-32 nuts (4), screws (4), washers (4), and cable ties. Supports VESA 100 x 100, 100 x 50, and 75 x 75.

Provides mounting the Vehicle Dock for use on a desk or tablet.

Powers a Vehicle Dock and an ET60 from a 19 to 90 VDC power source. Must be used with the ET60 with installed Touch Screen Heater.

Accepts 9V to 60V (9A maximum) vehicle power and converts it to 13.2V output. Requires Direct Wire Power Cable Kit (300039).

Accepts 50V to 150V (2A maximum) vehicle power and converts it to 13.2V output. Requires Direct Wire Power Cable Kit (300039).

For powering the Vehicle Dock from an existing VC80 installation.

Connects the DC/DC Power Supply (PS1370) to the Vehicle Dock.

Allows ET6X Vehicle Dock to be powered from a legacy LXE/Honeywell power cable. Requires DC/DC Power Supply (450083/84) and Direct Wire Power Cable Kit (300039).

Powers the Vehicle Dock for new installations. Contains: DC power cord, fuse holder cable, fuse, two butt splice connectors, and two ring terminals.

Provides power to the vehicle dock from a vehicle cigarette lighter port.

Mounts a USB keyboard to the Vehicle Dock.

USB Warehouse Keyboard with QWERTY key layout.

USB Warehouse Keyboard with AZERTY key layout.

USB Warehouse Keyboard QWERTY with USB Type-A Cable

Connects USB Warehouse keyboard to the Vehicle Dock.

Connects USB Warehouse keyboard with heater to Vehicle Dock.

Convert the tablet into a laptop with US English keyboard configuration.

Convert the tablet into a laptop with UK English keyboard configuration.

Convert the tablet into a laptop with French keyboard configuration.

Convert the tablet into a laptop with Spanish keyboard configuration.

Convert the tablet into a laptop with German keyboard configuration.

Allows user to carry the tablet. Requires ET6x Attachment Clips.

Allows user to carry the tablet. Requires ET6x Attachment Clips.

Provides mounting of the Carry Handle or Shoulder Strap to the tablet.

Provides working comfort for the tablet in the field and at a desk. The kickstand closes tightly when you are on the move, and it provides good ergonomics when the tablet is on flat surfaces.

Replacement standard battery.

Replacement extended battery.

Replacement no cell battery.

Provide power to the tablet. Provides power to the tablet. Requires country-specific AC line cord.

Passive stylus for use with the tablet (3-pack).

Connects a Passive Stylus to the tablet.

Provides easy writing, drawing, and navigation and accuracy with the thin tip and hovering capabilities.

Secures a stylus to the tablet.

Secures a stylus to the hand strap.

Replacement USB port door.