The microSD card slot provides secondary non-volatile storage. The slot is located under the battery. Refer to the documentation provided with the card for more information, and follow the manufacturer’s recommendations for use.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Slide the battery release latches toward the sides of the tablet.
The battery ejects slightly.
Lift the battery out of the tablet.
Remove the access door.
Slide the microSD card holder to the unlock position.
Lift the microSD card holder.
Insert the microSD card into the card holder door, ensuring that the card slides into the holding tabs on each side of the door.
Close the microSD card holder and lock it into position.
To ensure proper device sealing, the access door must be replaced and securely seated.
Replace the access door.
Insert the battery, bottom first, into the battery compartment at the back of the device.
Press the battery down into the compartment until the release latches snap into place.
