This section provides steps to install a nano SIM card.
Only use a nano SIM card.
For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include but are not limited to, working on an ESD mat and ensuring that the user is properly grounded.
Slide the battery release latches toward the sides of the tablet.
The battery ejects slightly.
Lift the battery out of the tablet.
Remove the access door.
Slide the SIM card holder to the unlock position.
Lift the SIM card holder door.
Place the nano SIM card into the card holder with contacts facing down.
Close the SIM card holder door.
Slide to SIM card holder door to the lock position.
To ensure proper device sealing, the access door must be replaced and securely seated.
Replace the access door.
Insert the battery, bottom first, into the battery compartment at the back of the device.
Press the battery down into the compartment until the release latches snap into place.
