1 | Keys (remove prior to use) |
2 | ANT 1 SMA pass-through connector |
3 | GPS SMA pass-through connector |
4 | ANT 2 SMA pass-through connector |
5 | 12 -15 VDC Power port |
6 | Tablet retention |
7 | Vehicle Dock Power LED |
8 | Tablet connection LED |
9 | Power and pass through antenna pogo pins |
10 | Security lock |
11 | Cable mounting tabs |
12 | Mounting bolt holes (8) for VESA 75 x 75 mm or 100 x 100 mm pattern |
1 | RS-232 port (The Vehicle Dock ships with an RS-232 cover. Keep the cover in place at all times to prevent corrosion and preserve the water seal in RS232 connector) |
2 | Tablet alignment rail |
3 | USB-A port |
4 | USB-A port |
5 | Tablet retention |
6 | USB pogo pins |
7 | Access door release latch |
LED | Status | Description |
|---|---|---|
Vehicle Dock Power LED | Green | Power is applied to the Vehicle Dock. |
Off | No power applied to the Vehicle Dock. | |
Tablet Connection LED | Green | Tablet is properly seated in the Vehicle Dock. |
Flashing red | Tablet is in the Vehicle Dock but is not seated properly. | |
Off | Tablet is not in the Vehicle Dock. |
