Stop the device from monitoring PLC triggers and results or delete the PLC configuration.
Click
PLC Config
from the
Admin Settings
menu.
Select
Control PLC
from the
PLC Configuration
screen.
Select the configured PLC device to control and observe its
Current State
.
Click
Start
to establish a connection to the PLC.
Click
Stop
to disconnect from the PLC.
Click
Delete
to disconnect from the PLC and remove the device definition from the Connectivity Gateway.
The
Current State
updates to reflect the PLC state after an action is selected. A confirmation message indicating the result of the action also displays at the bottom of the menu.
