1. GS20 Connectivity Gateway Leader Module
  2. Troubleshooting
  3. Editing Ethernet Port Adapter Options
  • GS20 Leader Module
Editing Ethernet Port Adapter Options

Editing Ethernet Port Adapter Options

If you are having trouble connecting to the device, try editing the ethernet port adaptor settings on your PC.
  1. Right-click on the WLAN/internet connection icon in the status icons taskbar in the lower right corner of a Windows PC and select
    Open Netwointerneternet Settings
    .
  2. Click
    Ethernet
    .
  3. Select
    Change Adapter Options
    .
  4. Right-click on the Ethernet adapter in use and click
    Properties
    .
  5. On the
    Networking
     tab, select
    Internet Protocol Version 4 (TCP/IPv4)
     and click
    Properties
    .
  6. Click
    Use the Following IP Address
     and set the IP.
    is available for use.
  7. Click
    OK
     twice to implement the new settings and wait 1-5 minutes.
  8. Open
    File Explorer
     on the host PC.
  9. Scroll to the bottom of the left panel and click
    Network
    .
  10. Right-click on the device and select
    Properties
     to view the IP address and confirm the change was implemented.