Replacing the Deflector
Replacing the Deflector

Replacing the Deflector

The deflector is mounted to the Converged Scanner shell with two screws. Replace a new deflector when necessary.
Unmount the device from the trigger and shell assembly, and then unmount the trigger assembly.
  1. Loosen the screws underneath the shell.
    Unscrew the deflector
  2. Rotate the deflector (1) away from the shell (2).
    Removing the deflector
  3. Replace a new deflector to the shell.
  4. Torque screws underneath the shell to 1.2 kgf-cm (6.7 lbf-in) with a Phillips PH0 screwdriver.
Replace the device into the shell, and then replace the trigger assembly.