1 | Camera | Takes photos and videos (available on configurations with camera only). |
2 | Display | Displays all information needed to operate the device. |
3 | Microphone | Use for voice communications or audio recordings. |
4 | Charging LED | Indicates the battery charge state while charging. |
5 | Ambient light sensor (under the display) | Determines ambient light for controlling display backlight intensity. |
6 | NFC antenna (under the display) | Provides communication with other NFC-enabled devices. |
7 | Speaker | Use for voice communication or audio playback. |
8 | Left 2 button | User programmable; defaults to Back button. |
9 | Notification LED | Indicates an application notification is received. |
10 | Left 1 button | User programmable |
11 | Wrist mount assembly | Consists of a device holder and a wrist strap; protects and holds the device in the shell. |
12 | Camera flash | Provides illumination for the camera (available on configurations with the camera only). |
13 | Wrist strap | Use for securely holding the device on the wrist; comes pre-installed on every Wrist Mount; available in small and large size. |
1 | Scan/Custom LED | Indicates data capture and custom applications-controlled status. |
2 | Right 1 button | User programmable; defaults to initiate data capture. |
3 | Right 2 button | User programmable; defaults to Home button; presses to power on the device. |
4 | Wrist mount assembly release tab | Press down to release the device in the shell from the wrist mount assembly. |
5 | Battery | Standard capacity 800 mAh battery provides power for operating the WS50 Camera; 1600 mAh for use with the WS50 Scanner. |
6 | Interface connector | Provides USB host and client communication, and device charging via cables and accessories. |
