Configuring a Secure Wi-Fi Network
Configuring a Secure Wi-Fi Network

Configuring a Secure Wi-Fi Network

  1. Go to
    Settings
    .
  2. Touch
    Network & Internet
    .
  3. Slide the switch to the
    ON
    position.
    The device searches for WLANs in the area and lists them on the screen.
  4. The device searches for WLANs in the area and lists them on the screen.
  5. Scroll through the list and select the desired WLAN network.
  6. If network security is
    WPA/WPA2-Personal
    ,
    WPA3-Personal
    , or
    WEP
    , enter the required password and then touch
    Connect
    .
  7. If network security is
    WPA/WPA2 Enterprise
    :
    1. Touch the
      EAP method
      drop-down list and select one of the following:
      • PEAP
      • TLS
      • TTLS
      • PWD
    2. Fill in the appropriate information. Options vary depending on the
      EAP method
      chosen.
      • When selecting
        CA certificate
        , Certification Authority (CA) certificates are installed using the
        Security
        settings.
      • When using the EAP methods PEAP, TLS, or TTLS, specify a domain.
      • Touch
        Advanced options
        to display additional network options.
  8. By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server for setting the connection to a proxy server and see Configuring the Device to Use a Static IP Address for setting the device to use a static IP address.
  9. Touch
    Connect
    .