1. WS50/WS50 RFID Product Reference Guide for Android™ 11
  2. Data Capture
  3. Pairing a Bluetooth Scanner
  4. Pairing Using Simple Serial Interface
  • WS50/WS50 RFID Product Reference Guide for Android™ 11
Pairing Using Simple Serial Interface

Pairing Using Simple Serial Interface

Pair the Bluetooth scanner to the device using Simple Serial Interface (SSI).
  1. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
  2. Install the battery into the scanner.
  3. Swipe up from the bottom of the Home screen and touch .
    Bluetooth Pairing screen
  4. Using the Bluetooth scanner, scan the barcode on the screen.
    The scanner emits a string of high/low/high/low beeps. The Scan LED flashes green indicating that the Ring Scanner is attempting to establish a connection with the device. When a connection is established, the Scan LED turns off and the Ring Scanner emits one string of low/high beeps.
    A notification appears on the Notification panel and the icon appears in the Status bar.