Scanner Features
Scanner Features

Scanner Features

The Scanner is worn on the operator’s index and middle fingers and utilizes a thumb-operated trigger. It has a touch panel, a trigger assembly, an SE4770 scan engine, and other features.

Front View

Converged Scanner Front View
1
Scanner window
Provides data capture using the imager.
2
Microphone
Use for voice communications or audio recordings.
3
Display
Displays all information needed to operate the device.
4
Ambient light sensor
(under the display)
Determines ambient light for controlling display backlight intensity.
5
NFC antenna
(under the display)
Provides communication with other NFC-enabled devices.
6
Charging LED
Indicates the battery charge state while charging.
7
Speaker
Use for voice communication or audio playback.
8
Deflector
Protects the device.
The deflector includes mandatory laser safety warning markings and must always be fitted when in use.
9
Left button
User programmable; defaults to
Back
button.
10
Trigger assembly
Consists of a finger strap and a scan trigger; rotatable to provide left-hand or right-hand use.
11
Scan trigger
Initiates barcode data capture when a scan-enabled application is active.
12
Notification LED
Indicates an application notification is received.
13
Proximity sensor (optional)
Detects objects close to the device, enables the SE4770.

Rear View

1
Scan/Custom LED
Indicates data capture and custom applications-controlled status.
2
Interface connector
Provides USB host and client communication, and device charging via cables and accessories.
3
Right button
User programmable; defaults to
Home
button; presses to power on the device.
4
Strap buckle
Tightens or loosens the finger strap on the fingers.
5
Finger strap
Use for securely holding the device on the fingers. Comes pre-installed on every Converged Scanner.
6
Finger wedge
Cushions and stabilizes fingers within the strap.
7
Finger comfort pad
Cushions the fingers from the device.
8
Shell release tab
Press down to release the device from the shell.
9
Battery
High capacity 1300 mAh battery, provides power for operating the device.
To use the Scanner with the back of hand (BOH) mount, replace the trigger assembly with the BOH mount. See Installing the Back of Hand Mount for more details.