Host RTS Line State
Host RTS Line State
View content for :

Host RTS Line State

Parameter #
(SSI # 9Ah)
This parameter sets the expected idle state of the Serial Host RTS line.
The SSI interface is used with host applications that also implement the SSI protocol. However, you can use the scanner in a "scan-and-transmit" mode to communicate with any standard serial communication software on a host PC (see Decode Data Packet Format). If transmission errors occur in this mode, the host PC may be asserting hardware handshaking lines that interfere with the SSI protocol. Scan the High barcode to address this problem.
*Low (0)
High (1)