Assembling the Back of Hand Mount with the External Antenna
Assembling the Back of Hand Mount with the External Antenna
Assembling the Back of Hand Mount with the External Antenna
Insert the cable into the pocket, and then pull the cable through the pocket slot.
Orient the antenna to match the image on the pocket, and then insert the antenna into the pocket.
Insert the cable into the slot closest to the antenna.
Feed the cable through the wrist strap turning it at the junction, and then pull the cable out through the furthest slot as seen in the figure. Use one hand to feed the cable while the other directs it.
Insert the wrist strap end into the narrow opening.
Pull back the strap located on the hand wrap.
Attach the wrist strap to the hand wrap by pressing them together using the hook and loop fastener.
Insert the trigger cable and button through the trigger slot of the hand wrap.
Insert the strap through the strap slots on the hand mount, and then fasten it with the hook and loop fastener.
Connect the cable to the hand mount.
Position the hand wrap by sliding your hand through the wrist strap and hand wrap, with your thumb through the smaller opening and the remaining fingers through the larger opening.
Slide the strap through the buckle and secure the end of the strap in place with the hook and loop fastener. Adjust the hand strap to a comfortable position and to fit securely by tightening or loosening the strap.
Adjust the wrist strap to a comfortable position by tightening or loosening the strap, and then secure the end of the strap in place with the hook and loop fastener.