1. WS50/WS50 RFID Product Reference Guide for Android™ 11
  2. Application Deployment
  3. Android Factory Reset
  4. Performing a Factory Reset Using ADB
  • WS50/WS50 RFID Product Reference Guide for Android™ 11
Performing a Factory Reset Using ADB

Performing a Factory Reset Using ADB

Perform a Factory Reset using ADB.
Go to the Zebra Support & Downloads website at zebra.com/support and download the appropriate Factory Reset file to a host computer.
  1. Connect the device to a host computer using a USB cable.
  2. Go to
    Settings
    .
  3. Touch
    System
    Advanced
    Developer options
     .
  4. Slide the
    USB debugging
     switch to the
    ON
     position.
  5. Touch
    OK
    .
  6. If the device and host computer are connected for the first time, the
    Allow USB debugging?
     dialog box with the
    Always allow from this computer
     check box displays. Select the check box, if required.
  7. Touch
    OK
     or
    ALLOW
    .
  8. On the host computer, navigate to the
    platform-tools
     folder and open a command prompt window.
  9. Type
    adb devices
    .
    The following displays: 
    List of devices attached
XXXXXXXXXXXXXXX device
    Where XXXXXXXXXXXXXXX is the device number.
    If the device number does not appear, ensure that the ADB drivers are installed properly.
  10. Type:
    adb reboot recovery
  11. Press
    Enter
    .
    The System Recovery screen appears on the device.
  12. Press the
    Right
     button to navigate to
    Apply upgrade from ADB
     or
    Apply downgrade from ADB
    .
  13. Press and hold the
    Right
     button to select.
  14. On the host computer command prompt window type
    adb sideload <file>
    .
    where: <file> = the path and filename of the zip file.
  15. Press
    Enter
    .
    The Factory Reset package installs, and then the System Recovery screen appears on the device.
  16. Press and hold the
    Right
     button to reboot the device.
  17. Disconnect the USB cable from the device.
If you are not able to enter Android Recovery mode through the adb command, see Entering Android Recovery Manually.