1. US Home Page
  2. 123RFID Desktop User Guide
  3. Application Features
  4. New Features in FXR90 and FXR60 Readers
  5. Bluetooth Low Energy (BLE)
  6. BLE General Configuration
  • 123RFID Desktop
BLE General Configuration

BLE General Configuration

When the BLE interface is enabled, the following core parameters can be configured.
  • BLE Mode / Bridge
     – Enable or disable the BLE module and bridging functionality on the reader.
  • Scan State
     – Start or stop active/passive BLE scanning for surrounding beacons and peripherals.
  • Scan Interval (ms)
     – Specify the scanning cadence (time between consecutive scan windows in milliseconds).
  • Scan Window (ms)
     – Set the duration for which the reader actively listens on BLE advertising channels during each scan interval.
  • Filter Duplicate Packets
     – Toggle whether repeated advertisement packets from the same device MAC address should be filtered out or reported continuously.
  • RSSI Threshold (dBm)
     – Define a minimum signal strength cutoff so that only packets exceeding this threshold are processed.
Changes take effect immediately after clicking
Apply / Set Properties
 . Ensure that the Scan Window does not exceed the Scan Interval.