FXP20 will act as Keyboard and send the tags read out via the USB cable as HID keystrokes. User can configure/change the settings in the FXP20 via 123RFID Desktop app. To set the reader to HID mode, the user must set the default interface to '3- HID mode'. The user can configure other settings as shown in the image below. Once the reader is configured for HID, the user must power-cycle the reader to start reading tags in HID mode.
USB HID Configuration
HID Intercharacter Delay
– Set the delay between each of the keystrokes in milliseconds. Value must be between 0 and 255 ms.
USB Default Interface
– Set the USB interface. (0-Default to CDC, and 3- HID Mode)
USB keyboard Layout
– Set the keyboard layout that the HID mode will follow.
USB HID Prefix
– Add the prefix characters to the Tag's EPC.
USB HID Suffix
– Add the suffix characters to the Tag's EPC.
Set
– Click to set the config for the inventory session. These settings will be available temporarily for the inventory session.
Save to Reader
– Click to save the settings to the reader permanently.
