The Wi-Fi configuration settings allow the reader to connect to a wireless network. This enables the reader to communicate over the network without a physical Ethernet connection.
FX Reader Network Settings - Wi-Fi Configuration
FXR60 Network Settings - Wi-Fi Configuration
Existing Condition
This section provides details about the current Wi-Fi connection status.
Wi-Fi
- Enables or disables the reader's Wi-Fi radio.
Status
- Displays the current connection state (e.g., Connected, Disconnected).
ESSID
- The name of the currently connected wireless network.
Auto Connect
- Indicates if the reader is set to automatically connect to this network on startup.
Current IPV4 Address
- The IP address assigned to the reader by the wireless network.
MAC Address
- The unique hardware address of the reader's Wi-Fi interface.
Disconnect
- Terminates the current active Wi-Fi connection.
Wi-Fi Configuration
This section is used to establish a new connection to a wireless network. You can either enter the network details manually or scan for available networks.
Enter ESSID / Scan and Select
- Choose the method for finding a network.
Security Type
- The security protocol used by the wireless network (e.g., WPA2Personal, WEP, Open).
Password
- The password or pre-shared key required to join the network.
Auto Connect
- If checked, the reader will save this network's profile and attempt to connect to it automatically in the future.
Connect
- Initiates the connection to the specified wireless network using the provided credentials.
