Symptom | Possible Cause | Solution |
|---|---|---|
PowerPack Charging LED does not light when inserted. | PowerPack is not correctly seated. | Remove and re-insert the spare battery into the charging slot, ensuring it is correctly seated. |
PowerPack is not charging. | PowerPack was removed from charger or charger was unplugged from AC power. | Ensure charger is receiving power. Ensure PowerPack is seated correctly. Confirm PowerPack is charging. The PowerPack fully charges in approximately four hours. |
PowerPack is faulty. | Verify that other PowerPack charge properly. If so, replace the faulty PowerPack. | |
The PowerPack is not fully seated in the charger. | Remove and re-insert the PowerPack into the charger, ensuring it is firmly seated. | |
Ambient temperature of the charger is too warm or too cold. | Move the charger to an area where the ambient temperature is between 0°C and 40°C (32°F and 104°F). |
