• GS20 Leader Module
Run Mode
Run Mode

Run Mode

The GS20 Leader Module can run in continuous or triggered mode.
  1. Ensure that you set up continuous mode between leader and followers before selecting an operating mode.
  2. From the
    Home
     screen, navigate to the
    Configuration
     screen using the left navigation menu.
  3. On the
    Configuration
     screen, use the bottom right
    Run Mode
     section to change between
    Trigger
     and
    Continuous
     modes.
  4. Click
    Update
     for the changes to take effect.
  5. Observe the warning screen indicating that scan data is erased once the changes are implemented. Acknowledge the warning to proceed with your changes.