Event | Beeper | Power LED |
|---|---|---|
Power Up | ||
Power up with Low Power | 
Low, Medium, High Tone | 
Solid Red |
Power up with Limited Power
(USB or 15W PoE) |
Low, Medium, High Tone | 
Green (Slow Blink) |
Power up with Full Power
(24V or 30W PoE) |
Low, Medium, High Tone |
Solid Green |
Job Error | 
Low, Low Tone |
Solid Green |
Device Maintenance | ||
Factory Reset | 
Medium, Medium Tone |
Solid Green |
Firmware Operations | ||
Firmware Update Start | - |
Solid Green |
Firmware Update Success | - |
Solid Green |
Firmware Update Fail | 
Low Tone |
Solid Green |
Autotune Operations | ||
AutoTune Start | 
Medium Tone |
Solid Green |
AutoTune Success | 
High Tone |
Solid Green |
AutoTune Fail |
Low Tone |
Solid Green |
Decode | ||
Barcode Decode Start | - |
Solid Green |
Barcode Decode Success |
Medium Tone |
Solid Green |
Barcode Decode Failure | - |
Solid Green |
Parameter Programming | ||
Parameter Entry Accepted | 
High, Low, High, Low Tone | - |
Parameter Number Entry Expecting Barcodes | 
High, Low Tone | - |
Parameter Entry Error | 
Low, High Tone | - |
