Setting Up Serial Triggering

There is no serial connection between the leader and the follower devices; triggering between the devices occurs over TCP/IP.

To set up a Serial Trigger from the host to the Connectivity Gateway:

Navigate to the

Configuration

screen using the left menu on the Home screen.

Locate the

Serial

section and click

Config

to set the serial settings for the device.

Toggle the

Output via Serial

button to output results via serial.

After the fields are configured, click

Confirm

to enable the settings on the device.

By default, Parity is set to None, Data Bits is set to 8, and Stop bits is set to 1. The maximum message length is 512 characters.