1. TC501 Product Reference Guide
  2. Applications
  3. Zebra Showcase App
  4. Available Demos
  5. Document Capture
  6. Document Capture Configurations
  • TC501 Product Reference Guide
Document Capture Configurations

Document Capture Configurations

This section describes the configurations available within Document Capture.
  • Input Source
     - Specifies the input source for data capture:
    Imager
     or
    Camera
    .
  • Session Timeout
     - Specifies the timeout period in milliseconds.
    • Integer range: 0 – 60000 (in increments of 500)
    • Default: 15000
  • Illumination
     - Enables or disables illumination during the scanning session.
  • Barcode Presence
     - Determines if a barcode is required to be present for a successful capture. If a barcode is present, it is decoded.
    • Mandatory
       - A barcode must be detected.
    • Optional
       - A barcode is not required.
  • Document Highlight Mode
     - Sets how the detected document is highlighted on the screen:
    • Border Only
       - Highlights only the border of the document.
    • Fill
       - Fills the entire document area with a color overlay.
  • Document Highlight Color
     - Allows the selection of the color used for the document highlight from a color picker.
  • Feedback Parameters
    :
    • Decode Audio Feedback
       - Selects an audio tone from a list to play upon a successful decode.
    • Decode Haptic Feedback
       - Enables or disables device vibration upon a successful decode.
    • Decode LED Notification
       - When enabled, the green LED flashes to indicate a successful decode.
    • Beep Volume Channel
       - Selects the volume channel to use for the decode audio feedback:
      • Ringer
         - Uses the Ringer volume setting.
      • Music and Media
         - Uses the Music and Media volume setting.
      • Alarms
         - Uses the Alarms volume setting.
      • Notification
         - Uses the Notification volume setting (default).