1. TC501 Product Reference Guide
  2. Getting Started
  3. Setting Up the Device
  4. Installing the MicroSD Card
  • TC501 Product Reference Guide
Installing the MicroSD Card
View content for :
Platform:

Installing the MicroSD Card

This section describes the steps to install a microSD card in your
TC501
.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded.
Video:
 Installing the MicroSD Card

  1. Power off the device.
  2. Push both battery latches inward.
    An illustration of the battery being pressed inward.
    Do not attempt to insert fingers under the latches when pulling on the battery. Damage to the latches may occur.
  3. While gripping the battery latches, lift the battery out of the device.
    An illustration of the battery being lifted out from the device.
  4. Pull the card holder out of the device.
    An illustration of the SIM/microSD card tray being removed from the TC501 device.
  5. Flip over the card holder.
  6. Place the microSD card into the card holder with the contacts facing up.
    An illustration of the microSD card being inserted into the SIM/microSD card tray
  7. Flip over the card holder.
  8. Insert the card holder back into the device.
    An illustration of the SIM/microSD card tray being inserted into the TC501 device.
  9. Insert the battery, bottom first, into the battery compartment in the back of the device.
    An illustration of the device battery being installed.
  10. Press the battery down into the device until the release latches click into place.