1. TC501 Product Reference Guide
  2. Accessories
  3. 5-Slot Ethernet Charging Cradle
  4. Ethernet Communication
  5. Configuring Ethernet Static IP Address
  • TC501 Product Reference Guide
Configuring Ethernet Static IP Address

Configuring Ethernet Static IP Address

This device includes Ethernet cradle drivers. After inserting the device, configure the Ethernet connection.
  1. Go to
    Settings
    .
  2. Touch
    Network & internet
    Ethernet
    .
  3. By default, the Ethernet switch is on. If it is off, slide the Ethernet switch to the
    ON
     position.
  4. Place the device into the Ethernet cradle slot.
  5. Touch
    eth0
    .
  6. Touch
    Disconnect
    .
  7. Touch
    eth0
    .
  8. Touch the
    IP
     settings list and select
    Static
    .
  9. In the
    IP address
     field, enter the proxy server address.
  10. In the
    Gateway
     field, enter a gateway address for the device.
  11. In the
    Netmask
     field, enter the network mask address.
  12. In the
    DNS
     address fields, enter a Domain Name System (DNS) address.
  13. Touch
    CONNECT
    .
  14. Touch the Home button.