1. TC501 Product Reference Guide
  2. Getting Started
  3. Setting Up the Device
  4. Installing a SIM Card (WWAN Only)
  • TC501 Product Reference Guide
Installing a SIM Card (WWAN Only)
View content for :
Platform:

Installing a SIM Card (WWAN Only)

This section describes the steps to install a SIM card in your
TC501
.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded.
Video:
 Installing a SIM Card

  1. Power off the device.
  2. Push both battery latches inward.
    An illustration of the battery being pressed inward.
    Do not attempt to insert fingers under the latches when pulling on the battery. Damage to the latches may occur.
  3. While gripping the battery latches, lift the battery out of the device.
    An illustration of the battery being lifted out from the device.
  4. Pull the card holder out of the device.
    An illustration of the SIM/microSD card tray being removed from the TC501 device.
  5. Place the SIM card into the card holder.
    An illustration of the SIM card being placed into the SIM/SD card tray.
  6. Insert the card holder back into the device.
    An illustration of the SIM/microSD card tray being inserted into the TC501 device.
  7. Insert the battery, bottom first, into the battery compartment in the back of the device.
    An illustration of the device battery being installed.
  8. Press the battery down into the device until the release latches click into place.