1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Printer Commands
  3. usb.mirror.enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
usb.mirror.enable

usb.mirror.enable

This command enables or disables the ability to perform mirroring of a USB device.

Setvar

To enable or disable the USB device mirroring ability:
! U1 setvar "usb.mirror.enable" "value"
Values
  • "on"
     Mirroring is enabled
  • "off"
     Mirroring is disabled
Default
  • For printers purchased in the EMEA region after August 1, 2025:
    "off"
  • For all other printers:
    "on"

Getvar

To retrieve the current setting value:
! U1 getvar "usb.mirror.enable"