Parameters | Details |
|---|---|
a
= IP resolution | Values:
A = ALL
B = BOOTP
C = DHCP AND BOOTP
D = DHCP
G = GLEANING ONLY
R = RARP
P = PERMANENT
Default:
A
Use of GLEANING ONLY is not recommended when the Wireless Print Server or Wireless Plus Print Server is installed
|
b
= IP address | Values:
Any properly formatted IP address in the xxx.xxx.xxx.xxx format. |
c
= subnet mask | Values:
Any properly formatted subnet mask in the xxx.xxx.xxx.xxx format. |
d
= default gateway | Values:
Any properly formatted gateway in the xxx.xxx.xxx.xxx format. |
e
= WINS server address | Values:
Any properly formatted WINS server in the xxx.xxx.xxx.xxx format. |
f
= connection timeout checking | Values:
Y =
YesN =
NoDefault:
Y
|
g
= timeout value | Time, in seconds, before the connection times out.
Values:
0
through
9999
Default:
300
|
h
= ARP broadcast interval | Time, in minutes, that the broadcast is sent to update the device’s ARP cache.
Values:
0
through
30
Default:
0
(no ARP sent) |
i
= base raw port number | The port number that the printer should use for its RAW data.
Values:
1
through
65535
Default:
9100
|
^XA
^NSa,192.168.0.1,255.255.255.0,192.168.0.2
^XZ