Parameters | Details |
|---|---|
type =
type of alert | Values:
Default:
This parameter must be specified as R or C for
print
,
printlabel_threshold
, and
frequency
to be saved. However,
units
will always be set. |
print =
determines if the alert prints a label | Values:
Default:
N
|
printlabel threshold=
the distance where the first alert occurs | Values:
Default:
R =
50 km (1,968,500 inches) and
C =
0 (off). |
frequency =
distance before reissuing the alert | The unit of measurement is in meters. The range is 0 to 2000. The range for G-Series printers is 0 or 5 to 2000 meters. When set to
0
, the alert label is only printed on power-up or when the printer is reset. Default:
0
(print on power-up). |
units =
odometer and printhead maintenance commands | The units parameter reports units of the odometer and printhead maintenance commands, as follows:
~HQOD,~HQPH,~WQOD
,
~WQPH
.
Values:
Default:
I
|
