You can request an allconfig report using JSON, and it will return all settings with characteristics.
To get all SGDs and their values along with various other information including defaults:
{}{"allconfig":null}
For the
"allconfig"
response, it will start with
{"allconfig":{
and end with
}}
If you do an
allconfig
, you can get the setting attributes for all settings as follows:
{"allconfig": {"ip.port":{"value":"6101","type":"integer","range":"0- 65535","clone":true,
"archive":true,"access":"RW"},
"ip.port_alternate":{"value":"9100","type":"integer","range":"0-65535","clone":true,
"archive":true,"access":"RW"},
"ip.sgd_json_port":{"value":"9200","type":"integer","range":"0- 65535","clone":true,
"archive":true,"access":"RW"}, another setting, ... the last setting}}
-
"value"
indicates the current value stored in the setting.
-
"type"
indicates the type of value. Possible values are integer, enum, bool, string, double, ipv4-address, ipv6- address.
-
"range"
indicates the range of a setting. For strings this is the range of the string length. For enums it is the possible enum values.
-
"clone"
indicates if it is safe to store this setting and apply it to another link-os printer.
-
"archive"
indicates if is safe to store this setting and apply it to same link-os printer at a later time.
-
"access"
indicates if the setting is RW (read/write), R (read-only), or W (write-only).
If you do an
allconfig
, you can get the setting attributes for all settings as follows:
{}{"allconfig":null}
For the values used above it returns these entries:
"device.friendly_name":{"value":"XXQLJ120900310","type":"string","range":
"0-17","clone":false,"archive":true,"access":"RW"},
"device.company_contact":{"value":"123-555-1212","type":"string","range":
"0-128","clone":true,"archive":true,"access":"RW"},
"device.location":{"value":"my desk","type":"string","range":"
0-128","clone":true,"archive":true,"access":"RW"},