Parameters | Details |
|---|---|
r =
rotate field | Values:
N =
normalR =
rotated 90 degreesI =
inverted 180 degreesB =
bottom-up 270 degrees, read from the bottom upInitial Value at Power Up:
N
|
z =
justificationz
parameter is available only with printers with firmware version V60.14.x, V50.14.x, or later. | Values:
0 =
left justification1 =
right justification2 =
auto justification (script dependent)Default:
auto for
^TB
and left for all other commands |