1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Network Commands
  3. ip.ipp.mode
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.ipp.mode

ip.ipp.mode

This command sets or retrieves the Internet Printing Protocol (IPP) setting. The printer can be set for either IPP/IPPS or IPPS (Internet Printing Protocol Secure)-only operation.

Setvar

To set the IPP mode:
! U1 setvar "ip.ipp.mode" "value"
Values
  • "ipp/ipps"
     enables IPP/IPPS
  • "ipps"
    enables IPPS-only
Default
  • For printers purchased in the EMEA region after August 1, 2025:
    "ipps"
  • For all other printers:
    "ipp/ipps"

Getvar

To retrieve the current setting of the IPP mode:
! U1 getvar "ip.ipp.mode"
Example
This
setvar
 example shows the value set to
"ipps"
. 
! U1 setvar "ip.ipp.mode" "ipps"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"ipps"
.