Return RFID Data Log to Host
The firmware version determines the way that these commands function:
-
In firmware X.20.16Z and later, for security, logging is disabled by default. The
^HL
command clears the current data log and restarts data recording. The
~HL
command does not automatically clear the data log. The RFID host logs can be enabled or disabled by the
rfid.log.enabled
SGD command (see
rfid.log.enabled).
-
In firmware X.20.15Z and earlier, logging is enabled by default. Both commands clear the current data log and restart data recording.
In the log, RFID data displays in this format:
[date&time][RFID operation],[program position],[antenna element],
[read or write power], [RFID status],[data]
-
[date&time]*
a time stamp for the log entry * With some older versions of firmware, this parameter does not display.
-
-
[program position],[antenna element],[read or write power]
*
Additional information about the program position, the antenna, and the read or write power follows the RFID operation.
R,F1,D3,27,00000000,DATA
where
F1
= the program position,
D3
= the antenna, and
27
is the write power. * With some older versions of firmware, these parameters do not display.
-
[RFID status]
####
or
########
= an RFID error code (See the RFID Programming Guide for your printer for more information on error codes. You can download a copy from
www.zebra.com/manuals.)
FFFFFFFF
(or limited to length
FFFF
for some printers) = indicates that the log file was reset
-
-
Data is shown in the format specified by the
^RFW
command (ASCII, Hex, or EPC).
-
If the RFID data log exceeds the maximum size, the following occurs:
-
In firmware X.20.16Z and later, when the data log reaches 1500K, one or more older entries are deleted to make room for the newest entry.
-
In firmware X.20.15Z and earlier, when the data log reaches 64K, the RFID data log is cleared automatically, and data recording restarts. When this happens, the following appears in the log:
E,FFFFFFFF,Logfile automatically reset
-
In firmware X.20.15Z and earlier, If the printer loses power, the log is lost. If the log results are important to you, retrieve the information frequently.