Parameters | Details |
|---|---|
e
= ESSID value | Values:
Any value up to 32 characters, including all ASCII and Extended ASCII characters, including the space character. When this parameter is left blank, the ESSID is not changed.Default:
125 |
o
= operating mode | Values:
I (Infrastructure), A (Adhoc)Default:
I |
p
= wireless radio card preamble | Values:
L =
longS =
shortDefault:
L |
h = wireless pulse
| Adds a pulse to the network traffic generated by the printer. This pulse is necessary with some network configurations to keep the printer online.
Values:
0 =
disabled1 =
enabledDefault:
1 |
i = wireless pulse interval
| Sets the interval at which the wireless pulse is sent when the wireless pulse feature is enabled.
Values:
5 to 300 secondsDefault:
15 |
j = channel mask
| For commonly used channel masks, see
Table 13 on page 424
.Values:
4 Hexadecimal digits preceded by “0x” (0x0000 to 0xFFFF)Default:
0x7FF |
k = international mode
| In international mode, the printer uses the channel set by the access point.
Values:
0 (Disabled), 1 (Enabled)Default:
0 |
Region | Channel Mask |
|---|---|
United States, Canada, Latin America | 0x7FF |
Europe, Middle East, Africa, other | 0x1FFF |
Japan | 0x3FFF |