1. DS8208/DS8288 Product Reference Guide
  2. RFID Scanning
  3. Handheld RFID Scanning
  • DS82 Series Product Reference Guide
Handheld RFID Scanning
View content for :
User:

Handheld RFID Scanning

Configure the relevant parameters correctly to allow reading RFID tags when the scanner is in handheld mode.
You can program the scan trigger or programmable button to initiate an RFID read.
By default, the scan trigger is set to only decode barcodes. To modify that behavior, configure the Primary Trigger parameter to
Imager plus RFID
 or
RFID Only
.
The secondary trigger is set to decode RFID tags only by default. To modify that behavior, configure the Secondary Trigger parameter.
RFID Scanning in Handheld Mode
Hand holds the scanner and presses the programmable button. Concentric lines indicate the RFID reader's field of view.
The scanner decodes all RFID tags in the RF field of view while you hold the appropriate trigger, and stops once you release the trigger. The scanner beeps while the scan LED flashes green and the RFID LED momentarily turns off to indicate a successful tag read.