Print Print Quality Label Width (Dots)
Print Print Quality Label Width (Dots)
View content for :

Print Quality
Label Width (Dots)

Specify the width of the labels being used, in dots. The default value is the maximum width for the printer, based on the printhead’s DPI value.
Setting the width too narrow can result in portions of a label format not being printed on the media. Setting the width too wide wastes formatting memory and can cause the printer to print off of the label and onto the platen roller. This setting can affect the horizontal position of the label format if the image was inverted using the
ZPL command.
Accepted values:
ZD621 203 dpi = 0002 to 832 dots
ZD621 300 dpi = 0002 to 1280 dots
Related ZPL command(s):
SGD command used:
Printer web page:
View and Modify Printer Settings
Media Setup
Print Width