Restore specific printer, print server, and network settings back to the factory defaults.
Use care when loading defaults because you will need to reload all settings that you changed manually. This menu item is available through two user menus with different default values for each.
Accepted values:
PRINTER
–Restores all printer settings other than the network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually.
NETWORK
–Reinitializes the printer’s wired or wireless print server. With a wireless print server, the printer also reassociates with your wireless network.
LAST SAVED
–Loads settings from the last permanent save.
NO MOTION
–Tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press the
FEED
button to position the next web(label gap)
SHORT CAL
–Sets the media and web thresholds without adjusting sensor gain, determines the label length, and feeds the media to the next web.
Related ZPL command(s):
PRINTER–
^JUF
NETWORK–
^JUN
LAST SAVED–
^JUR
Control panel key(s):
PRINTER–Hold
FEED
+
PAUSE
during a printer power-up to reset the printer parameters to factory values.
