1. Printer Setup Utility for Android™
  2. Discovery and Connectivity
  3. Print Touch
  4. Print Touch (Tap and Pair) Connection Setup
  • Printer Setup Utility for Android™ User Guide
Print Touch (Tap and Pair) Connection Setup
View content for :
Platform:

Print Touch (Tap and Pair) Connection Setup

The following procedure describes how to pair the printer using Print Touch:
  1. Tap your device’s NFC location against the Print Touch icon on the printer.
    Tap and pair image with ZQ630 Plus shown
    If you are unable to connect to your printer, try putting your printer in Limited Pairing Mode using the following procedure.
    Limited Pairing Mode applies to printers running Link-OS 6 and later.
    1. Press and hold feed icon
      FEED
       until either the Bluetooth/Bluetooth Low Energy icon or the data light flashes.
      This puts the printer in a discoverable mode.
    2. Tap your device’s NFC location against the Print Touch icon on the printer.
    Printer Setup Utility finds and connects to the printer.
  2. On the Tap NFC Icon screen, tap the
    NFC
     icon.
    The application searches for available printers.
  3. Based on your connection:
    If your connection is by...
    Then...
    Network
    Follow the prompts until you reach the Diagnostic mode prompt, and then tap
    Disable
    .
    Bluetooth (First time and unpaired)
    Tap
    Pair
     to connect the devices.
    If your device's Bluetooth was off, tap
    Allow
     at the prompt, and then tap
    Pair
     on the next screen.
    Bluetooth (Previously paired)
    The pairing will establish the connection automatically.
The printer dashboard displays.