1. Zebra Aurora User Guide
  2. Connectivity Guidelines
  3. Network Communication
  4. Setting a Static IP Address
  • Zebra Aurora User Guide
Setting a Static IP Address

Setting a Static IP Address

DHCP is the default mode for IP addressing.
  1. Disable the Enabled DHCP checkbox.
  2. Change the network related settings based on your network configuration. For example:
    1. Open a command prompt
    2. Type the command: ipconfig
      1. All TCP/IP network configuration values display on the host PC
    3. Identify a valid network interface:
    4. In Zebra Aurora, enter the following values:
      1. IP Address: 192.168.4.xxx (where xxx is any value from 1-255)
      2. Subnet Mask: 255.255.252.0
      3. Default Gateway: 192.168.4.1
  3. Click Apply when complete. The device reboots with the new static IP address.