1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. SGD Printer Commands
  4. cutter.clean_reminder_enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
cutter.clean_reminder_enable

cutter.clean_reminder_enable

This command enables or disables the cutter cleaning reminder feature.

Setvar

To set the cutter cleaning reminder feature:
    ! U1 setvar "cutter.clean_reminder_enable" "value"
Values
  • "1" = enables the clean cutter reminder
  • "2" = disables the clean cutter reminder
Default
disabled

Getvar

To retrieve the status of the
cutter.clean_reminder_enable
 command:
! U1 getvar "cutter.clean_reminder_enable"
Example
In this example, the
setvar
 sets the value to
"1"
 (enabled).
 ! U1 setvar "cutter.clean_reminder_enable" "1"