1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. ZPL Commands
  4. ^MF
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^MF

^MF

The
^MF
 command dictates what happens to the media at power-up and at head-close after the error clears.

Media Feed

Format:
^MFp,h
Parameters
Details
p =
 feed action at power-up
Values:
F =
 feed to the first web after sensor
C =
 (see~JC definition)
L =
 (see~JL definition)
N =
 no media feed
S =
 short calibration
1
Default:
C
h =
 feed action after closing printhead
Values:
F =
 feed to the first web after sensor
C =
 (see ~JC definition)
L =
 (see ~JL definition)
N =
 no media feed
S =
 short calibration
1
Default:
C
1. These values are supported only on Xi4, RXi4, XiIIIPlus, PAX, ZM400/ZM600, RZ400/RZ600, and S4M printers.
Comments:
It is important to remember that if you choose the
N
setting, the printer assumes that the media and its position relative to the printhead are the same as before power was turned off or the printhead was opened. Use the
^JU
command to save changes.