1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. ZPL Commands
  4. ^PN
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^PN

^PN

The ^PN command causes the printer to run a Presenter cycle. The parameter defines the amount of media ejected. The total amount of media ejected when a ^PN is executed, then, is 50 mm + ~PL value + ^PN value. (See ~PL).

Present Now

Supported Devices:
  • KR403
Format:
^PNa
Parameters
Details
a = media eject length
Values:
0-255 = additional mm of media to eject
Default:
 none
The command is ignored if parameters are missing or invalid.