1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. ZPL Network Commands
  4. ^NB
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^NB

^NB

Use this command to tell the printer whether to search for a wired print server at bootup. This command is ignored on the Xi4, RXi4, ZM400, ZM600, RZ400, and RZ600 printers.

Search for Wired Print Server during Network Boot

Only one print server can be installed in the S4M at one time, so this check does not occur. Table 1 identifies which device becomes the active print server under different conditions.
Results of Check for Wired Print Server
If the Check for Wired Print Server is set to:
Installed and Connected to a Live Ethernet Network
Then, the Active Print Server will be:
Wired
Wireless
Skip
X
X
Wireless
X
—
Wired
—
X
Wireless
Check
X
X
Wired
X
—
Wired
—
X
Wireless
A wireless option board must have an active radio that can properly associate to an access point.
Format:
^NBa
Parameters
Details
a
 = check for wired print server at boot time
Values:
C
 = check
S
 = skip check
Default:
S