This command sets a space-delimited list of the domain name servers from an internal wired print server. Up to three addresses may be set. Both IPv4 and IPv6 are supported.
Setvar
To set the list of DNS internal wired print servers, specify a list of space-delimited IP addresses, separated by spaces, to be used as DNS servers when
To retrieve a space-delimited list of IP address(es) of DNS server(s), up to three, that are currently in use by the device. The values to be used are a combination of addresses received from DHCPv4, DHCPv6, and user-set values using the following rules:
At least one spot will be allocated to any enabled IP version.
IPv4 addresses will take at least two slots if at least two IPv4 addresses are provided.
User-set values will be included if static/permanent addresses are used.
Retrieved values are always the values currently in use, which may not match values that were just set, depending on if you are using a static or auto address type.
