1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. SGD Network Commands
  4. wlan.ipv6.dhcp.option39_format
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
wlan.ipv6.dhcp.option39_format

wlan.ipv6.dhcp.option39_format

This command sets the value of the format field for option 39 (to configure the Fully Qualified Domain Name or FQDN) in DHCPv6 with a WLAN connection. The value is a string up to 127 characters, and the default is the value set by
device.friendly_name
.

Setvar

To set the format string:
! U1 setvar "wlan.ipv6.dhcp.option39_format" "value"
where
"value"
 is a string of up to 127 characters.
If the value is a source SGD command, it must be bracketed with
"<"
and
">"
, such as
"<device.friendly_name>"
.

Getvar

To retrieve the string:
! U1 getvar "wlan.ipv6.dhcp.option39_format"
Example
This command sets the value to
"printer2"
.
! U1 setvar "wlan.ipv6.dhcp.option39_format" "printer2"
 
! U1 getvar "wlan.ipv6.dhcp.option39_format"
Result
"printer2"