1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. SGD Printer Commands
  4. media.extended_presentation
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
media.extended_presentation

media.extended_presentation

This command increases the peel presentation position to match the extended peel plate option on some printer models.
This command is supported only by the ZT411 and ZT421 printers.
When this parameter is enabled, the peel-bar-to-printline, tear-off-to-printline, and applicator-to-printline distances are increased.
When this parameter is disabled, the distances return to their initial values.

Setvar

To set the extended media presentation:
! U1 setvar "media.extended_presentation" "value"
Values
"enabled"
 enables extending the peel presentation position
"disabled"
 disables extending the peel presentation position
Default
"disabled"
The initial value is
"disabled"
; however, this setting will not reset to a particular default.

Getvar

To retrieve the extended media presentation:
! U1 getvar "media.extended_presentation"
Example
This
setvar
 example enables the command by setting the value to
"enabled"
. 
! U1 setvar "media.extended_presentation" "enabled"