1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. ZPL Commands
  4. ^JB
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^JB

^JB

The
^JB
 command is used to initialize various types of Flash memory available in the Zebra printers.

Initialize Flash Memory

Format:
^JBa
Parameters
Details
a =
 device to initialize
Values:
A =
 Option Flash memory
B =
 Flash card (PCMCIA)
E =
 internal Flash memory
Default:
 a device must be specified
Example:
 This is an example of initializing the different types of flash memory:
^JBA –
 initializes initial Compact Flash memory when installed in the printer.
^JBB –
 initializes the optional Flash card when installed in the printer.
^JBE –
 initializes the optional Flash memory when installed in the printer.
Initializing memory can take several minutes. Be sure to allow sufficient time for the initialization to complete before power cycling the printer.