1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  3. SGD Network Commands
  4. ip.ipp.enable
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.ipp.enable

ip.ipp.enable

This command sets or retrieves if the Internet Printing Protocol (IPP) feature is on. When you send this command, a network reset is required for the change to take effect.

Setvar

To enable or disable the IPP feature:
! U1 setvar "ip.ipp.enable" "value"
Values
  • "on"
    enables IPP
  • "off"
    disables IPP
Default
"on"

Getvar

To retrieve the current setting of the IPP feature:
! U1 getvar "ip.ipp.enable"
Example
This
setvar
 example shows the value set to
"off"
. 
! U1 setvar "ip.ipp.enable" "off"
What the
setvar
 value is set to is the
getvar
 result. In this example, the
getvar
 result is
"off"
.